Concettina Buccella

Associate Professor

Felix 1, Room
concettina.buccella@univaq.it

Concettina Buccella was born in L'Aquila. She received the M.S. degree and the Ph.D. degree in Electrical Engineering from the University of L'Aquila, Italy, in 1988 and the University of Rome “La Sapienza” in 2005, respectively. After graduation she was a research engineer at Italtel SpA, L'Aquila, then in 1991 she joined the Department of Electrical Engineering at the University of L'Aquila, where she was an assistant professor and since 2001 she is Associate Professor of Electrotechnics.

Her research interests deal with smart grids, power converters modulation techniques, renewable energy management, analytical and numerical modeling, electromagnetic compatibility, controlled active shields, power line communications, models of biological systems with particular attention to the human eye, applications of neural networks and wavelet transform. She authored more than 100 papers on international journals and on conference proceedings.

Concettina Buccella is a Senior Member of the IEEE, a member of the Power Electronics Committee and of the Smart Grids Committee of the IEEE Industrial Electronics Society, for many years she was a member of the Electrostatic Process Committee of the IEEE Industry Applications Society. She is a Member of the Committee for Education Rights at the University of L'Aquila. She was an evaluator of research projects, Ph.D. candidates and in promotions to Full Professor and to Associate Professor rank for several foreign institutions and universities. Concettina Buccella is a reviewer for many international journals, mostly IEEE Transactions, including TIE and TII. She was a member of the Organizing Committee and a teacher of the Post M.S. Master “Energy Manager” at the Faculty of Engineering, University of L'Aquila. During 2009-2011, she was a Guest Editor of the IEEE Transactions on Industrial Electronics - Special Section on: "Methods and Systems for Smart Grids Optimization" (published on October 2011). She has been a committee member, a reviewers and a session chair in international conferences; currently a she is a Track Chair for “Power Systems” at the 39-th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013, November 10-13, 2013, Vienna, Austria) and a Technical Program Committee Member of the 2013 IEEE International Workshop on Intelligent Energy Systems “Managing the Complexity in Energy Systems” (IWIES 2013, November 14, 2013, Vienna, Austria). She is a Member of Scientific Committee of International Conference on Renewable Energy for Developing Countries (REDEC’14) Beirut, Lebanon, Nov. 26-27, 2014. She is a Program Committee member of IEEE IWIES 2014 which will be held in conjunction with IEEE SMC 2014 (www.smc2014.org) on October 8, 2014 in San Diego, CA, USA. She is Program Committee member of International Symposium on Environment Friendly Energies and Applications, (EFEA 2014) that will be held at Supmeca Campus in Paris, on the 19-21 November 2014.

Concettina Buccella has been a Co-Founder of DigiPower Ltd., a University of L'Aquila spin-off, founded in 2007 and operating in the field of industrial electronics, power systems, smart grids, modeling, electromagnetic compatibility. Since 2012 she has been the C.E.O.

She is a co-recipient of the 2012 Best Paper Award of the IEEE Transaction Industry Information for the paper: “Smart Grid Technologies: Communication Technologies and Standards”, IEEE Transaction on Industrial Informatics, Vol. 7, N. 4, pp. 529 - 539, Nov. 2011. (authors: V. C. Gungor, D. Sahin, T. Kocak, S. Ergüt, C. Buccella, C. Cecati, G. P. Hancke) and a co-recipient of the 2013 Best Paper Award of the IEEE Transaction Industry Informatics for the paper: “Digital Control of Power Converters - A Survey ”, IEEE Transaction on Industrial Informatics, Vol. 8, N. 3, pp. 437-447, Aug. 2012. (authors: C. Buccella, C. Cecati, H. Latafat).

Teaching web pages:
Office hours:
After the lectures or by appointment / Contact the teacher

Riferimenti bibliografici
[1] B. Li, S. Zhou, D. Xu, R. Yang, D. Xu, C. Buccella, C. Cecati, "An Improved Circulating
Current Injection Method for Modular Multilevel Converters in Variable-Speed Drives,"
IEEE Transactions on Industrial Electronics, Vol. 63, No. 11, pp. 7215 - 7225, Nov.
2016.
[2] N. A. Al-Emadi, C. Buccella, C. Cecati, H. A. Khalid, “A Novel DSTATCOM with 5-
Level CHB Architecture and Selective Harmonic Mitigation Algorithm,” Electric Power
Systems Research, Elsevier, Vol. 130, pp. 251-258, Jan. 2016.
[3] C. Buccella, C. Cecati, H. Latafat, K. Razi, “Multi String Grid-Connected PV System
with LLC Resonant DC/DC Converter,” Intelligent Industrial Systems, Springer, pp.
37-49, May 2015.
[4] T. Strasser, F. Andrén, J. Kathan, C. Cecati, C. Buccella, P. Siano, P. Leitão, G.
Zhabelova, V. Vyatkin, P. Vrba, V. Ma┼Öík, “A Review of Architectures and Concepts
for Intelligence in Future Electric Energy Systems,” IEEE Transactions on Industrial
Electronics, Vol. 62, No. 4, pp. 2424-2438, Apr. 2015.
[5] C. Buccella, C. Cecati, H. Latafat, P. Pepe, K. Razi, “Observer-based Control of LLC
DC/DC Resonant Converter Using Extended Describing Functions,” IEEE Transactions
on Power Electronics, Vol. 30, No. 10, pp. 5881 - 5891, Oct. 2014.
[6] P. Giammatteo, C. Buccella, C. Cecati, “Modeling of SiC Power MOSFETs,”
International Review of Electrical Engineering, Vol. 9, No. 4, pp. 671-680, 2014.
[7] C. Buccella, C. Cecati, H. Abu-Rub, “An overview on distributed generation and smart
grid concepts and technologies,” Abu-Rub H, Malinowsky M, Al-Haddad K, Power Elec-
tronics for Renewable Energy Systems, Transportation and Industrial Applications, pp.
50-68, Wiley, ISBN: 9781118634035, 2014.
[8] C. Buccella, C. Cecati, M. G. Cimoroni, K. Razi, “Analytical Method for Pattern Gene-
ration in Five-Level Cascaded H-Bridge Inverter Using Selective Harmonic Elimination,”
IEEE Transactions on Industrial Electronics, Vol. 61, No. 11, pp. 5811 - 5819, Nov. 2014.
[9] V. C. Gungor, D. Sahin, T. Kocak, S. Ergut, C. Buccella, C. Cecati, G. Hancke, “A
Survey on Smart Grid Potential Applications and Communication Requirements”, IEEE
Transactions on Industrial Informatics, Vol. 9, No. 1, pp. 28-42, February 2013.
[10] V. C. Gungor, D. Sahin, T. Kocak, S. Ergüt, C. Buccella, C. Cecati, G. P. Hancke “Smart
Grid and Smart Homes Key Players and Pilot Projects”, IEEE Industrial Electronics
Magazine, Vol. 6, No. 4, pp. 18-34, December 2012.
[11] C. Buccella, C. Cecati, H. Latafat, “Digital Control of Power Converters - A Survey,”
IEEE Transactions on Industrial Informatics, Vol. 8 , No. 3 , pp. 437-447, Aug. 2012,
2013 IEEE Transactions Industrial Informatics Best Paper Award .
[12] V. C. Gungor, D. Sahin, T. Kocak, S. Ergüt, C. Buccella, C. Cecati, G. P. Hancke “Smart
Grid Technologies: Communication Technologies and Standards”, IEEE Transactions
on Industrial Informatics, Vol. 7, No. 4, pp. 529 - 539, November 2011, 2012 IEEE
Transactions Industrial Informatics Best Paper Award .
1
[13] C. Buccella, C. Canizares, C. Cecati, F. Muzi, P. Siano, Guest Editorial of Special
Section: “Methods and Systems for Smart Grids Optimization”, IEEE Transactions on
Industrial Electronics, Vol. 58, No. 10, pp. 4483 - 4486, October 2011.
[14] C. Buccella, C. Cecati, A. Piccolo, P. Siano, “Fuzzy Control of Multilevel Inverters for
Fuel Cell Generator Sets”, A. Keyhani and M. Marwali (Eds.): Smart Power Grids 2011,
POWSYS, Chapter 4, pp. 83–102, springerlink.com, Springer-Verlag Berlin Heidelberg
2011.
[15] C. Buccella, V. De Santis, M. Feliziani, F. Maradei, “Finite Element Analysis of Tem-
perature Increase in Vascularized Biological Tissues Exposed to RF Sources”, IEEE
Transactions on Magnetics, Vol. 45, No.3, pp. 1682-1685, March 2009.
[16] V. De Santis, M. Feliziani, C. Buccella, and P. Tognolatti, “Prototype Design of a Thin-
Film Bulk Acoustic-Wave Resonator by the Finite Element Method”, IEEE Transactions
on Magnetics, Vol. 45, No.3, pp. 1116-1119, March 2009.
[17] C. Buccella, C. Cecati, F. de Monte, “A Coupled Electro-Thermal Model for Planar
Transformers Temperature Distribution Computation in Planar Transformer Design”,
IEEE Transactions on Industrial Electronics, Vol. 55, No. 10, pp. 3583-3590, October
2008.
[18] C. Buccella, V. De Santis, M. Feliziani, P. Tognolatti, ”Finite Element modelling of a
thin-film bulk acoustic resonator (FBAR)”, International Journal for Computation and
Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 27 No. 6, pp.
1296-1306, Sept. 2008.
[19] C. Buccella, V. De Santis, M. Feliziani, “Prediction of Temperature Increase in Human
Eyes Due to RF Sources”, IEEE Transactions on Electromagnetic Compatibility, Vol.
49, No. 4, pp. 825-833, November 2007.
[20] Buccella, M. Feliziani, G. Manzi , “Three-Dimensional FEM Approach to Model Twisted
Wire Pair Cables”, IEEE Transactions on Magnetics, Vol. 43, No. 4, pp. 1373 - 1376,
April 2007.
[21] C. Buccella, M. Feliziani, G. Manzi, “Pulse Shaping Numerical Procedures for Ultra Wide
Bandwidth Systems”, IEEE Transactions on Magnetics, Vol. 43, No. 4, pp. 1549-1552,
April 2007.
[22] C. Buccella, M. Di Renzo, F. Graziosi, M. Feliziani, G. Manzi, R. Tiberio, “Ultra Wide
Band Propagation Measurements in Indoor Working Enviroments and Through Building
Material”, IEEE EMC Newsletter, Spring 2006.
[23] C. Buccella, M. Feliziani, G. Manzi, “Wavelet Denoising Approach to Extract Accurate
FDTD Solution With Coarse Discretization In Transmission Lines”, IEEE Transactions
on Magnetics, Vol. 41, No. 5, pp. 1732-1735, May 2005.
[24] C. Buccella, M. Feliziani, F. Maradei, G. Manzi, “Magnetic Field Computation in Physi-
cally Large Domain with Thin Metallic Shields”, IEEE Transactions on Magnetics, Vol.
41, No. 5, pp. 1708-1711, May 2005.
2
[25] C. Buccella, A. Orlandi, “Clousure to discussion of an efficient technique for the evalua-
tion of lightning-induced voltage in a cylindrical vessel containing charged oil”, IEEE
Transactions on Industry Applications, Vol. 41, No. 2, pp. 536, March/April 2005.
[26] C. Buccella, M. Feliziani, G. Manzi, “Detection and Localization of Defects in Shielded
Cables by Time Domain Measurements with UWB Pulse Injection and Clean Algorithm
Postprocessing”, IEEE Transactions on Electromagnetic Compatibility, Vol. 46, No. 4,
pp. 597-605, Nov. 2004.
[27] C. Buccella, M. Feliziani, G. Manzi, “Experimental Investigations of Unshielded Cables
Excited by UWB Communication Transmitters”, WEAS Transactions on Environment
and Development Print ISSN: 1790-5079 E-ISSN: 2224-3496, (2004).
[28] C. Buccella, M. Feliziani, F. Maradei, G. Manzi, “Evaluation of the magnetic field levels
produced by a railway line”, IASTED, 432: Environmental Modelling and Simulation
(EMS 2004), November 22 – 24, 2004. St. Thomas, US Virgin Islands, Editor: L. Uber-
tini Location: St. Thomas, US Virgin Islands Publication Date: 22-Nov-2004 Hardcopy
ISBN: 0-88986-441-1 ; ISSN: 1925-8003 CD ISBN: 0-88986-441-1 ; ISSN: 1922-8058.
[29] C. Buccella, M. Feliziani and G. Manzi, “Penetration of Ultra Wide Band (UWB) Com-
munication Signals through Walls”, Ultra-Wideband Short Pulse Electromagnetics 7th
Book, Part 9, Springer-Verlag New York, pp. 784-795, 2007.
[30] C. Buccella, A. Orlandi, “An efficient technique for the evaluation of lightning-induced
voltage in a cylindrical vessel containing charged oil”, IEEE Transactions on Industry
Applications, Vol. 39, No. 2, pp. 368-373, March-April 2003.
[31] C. Buccella, M. Feliziani, “A hybrid model to compute the effects of a direct lightning
stroke on three-dimensional structures”, IEEE Transactions on Magnetics, Vol. 39 , No.
3, pp.1586-1589, May 2003.
[32] C. Buccella,“Circuit network analog for ESD current strikes composite structures”, IEEE
Transactions on Magnetics, Vol. 38, No.2, pp. 809-812, Marzo 2002.
[33] C. Buccella,“Skin effect considerations on transient electrical stresses in composite struc-
tures affected by electrostatic discharge”, IEEE Transactions on Magnetics, Vol. 38,
No.2, pp. 545-548, Marzo 2002.
[34] C. Buccella,“Two-dimensional analysis of composite structures by the Finite-Difference
Time-Domain method adopting scaling approach”, IEEE Transactions on Magnetics,
Vol. 38, No.2, pp. 845-848, Marzo 2002.
[35] C. Buccella, A. Orlandi, “Diagnosing transmission line terminations’ faults by means
of wavelet based crosstalk signature recognition”, IEEE Transactions on Components,
Packaging, and Manifacturing Technology, Part A, Vol. 23, No.1, pp. 165-170, March
2000.
[36] C. Buccella, “Quasi-stationary analysis of the electric field in anisotropic laminated com-
posites” IEEE Transactions on Industry Applications, Vol. 35, No.6, pp. 1296-1305,
November/December 1999.
3
[37] C. Buccella, “Quasi-static and dynamical computation of V-I characteristics of a
dust-loaded pulse-energized electrostatic precipitator”, IEEE Transactions on Industry
Applications, Vol. 35, No. 2, pp. 366-372, March/April 1999.
[38] C. Buccella, A. Orlandi, “Two-dimensional FDTD analysis for ionized electromagnetic
fields”, IEEE Transactions on Magnetics, Vol. 34, No. 5, pp. 3479-3482, September,
1998.
[39] C. Buccella,“Computation of V-I characteristics in electrostatic precipitators” Journal
of Electrostatics, Vol. 37, No. 4, pp. 277-291, August 1996.
[40] C. Buccella, S. Cristina, A. Orlandi, “Frequency analysis of the induced effects due to the
lightning stroke radiated electromagnetic field”, IEEE Transactions on Electromagnetic
Compatibility, Vol. 34, No. 3, pp. 338-344, August, 1992.
4
Riferimenti bibliografici
[1] “Analisi del campo elettrico in un precipitatore elettrostatico alimentato con tensione
impulsiva e valutazione della sua caratteristica V-I”, Tesi di Dottorato, Università degli
Studi “La Sapienza”, Roma, 1995.
[2] C. Buccella, C. Caruso, M. Feliziani, F. Maradei, “Individuazione e caratterizzazione
delle principali sorgenti di inquinamento elettromagnetico a frequenza industriale all’in-
terno di materiale rotabile” in atti del Convegno su “Predizione dell’impatto ambientale
dei sistemi elettromagnetici e valutazione della esposizione umana”, 22-23 Aprile 2002,
Roma.
[3] C. Buccella, M. Feliziani, “Calcolo e misura del campo magnetico all’interno di un treno
ad alta velocità con elettrificazione in corrente alternata”, Atti del 2° Convegno Nazionale
Strumenti e tecniche di misura per la protezione dell’uomo e dell’ambiente dai campi
elettromagnetici, Firenze, 28-29 Maggio 2003, pp. 121-124.
[4] C. Buccella, M. Feliziani, G. Manzi, R. Tiberio, “Sistema di rilevamento a basso costo di
trasmettitori gsm/gprs all’interno di aeromobili”, 101° Convegno Nazionale AEIT, Uno
sguardo al futuro nella società globale, una politica industriale per il paese, Capri, 16-20
Settembre 2006.
[5] C. Buccella, V. De Santis, M. Feliziani, P. Tognolatti, “Progettazione di un risonatore
MEMS FBAR con il metodo degli elementi finiti”, Il metodo degli elementi finiti nelle
applicazioni dell’Ingegneria Elettrica e dell’Informazione, Terza giornata di studi, Roma,
14 dicembre 2007.
Riferimenti bibliografici
[1] C. Buccella, S. Cristina, A. Orlandi,“Shielding performances of reinforced walls to the
field radiated by lightning”, in Proc. of 8th IEEE Int. Conference on Electromagnetic
Compatibility, Edinburgh, UK, pp. 60-66, September 21-24, 1992.
[2] C. Buccella, S. Cristina, A. Orlandi,“EMI in a reinforced concrete control building during
breaker and disconnector operations in HV substations”, in Proc. of 10th Int. Zurich
Symposium on EMC, Zurich, Switzerland, pp. 121-125, March 9-11, 1993.
[3] C. Buccella, S. Cristina, A. Orlandi, “Analysis of shielding properties of reinforced struc-
tures in electromagnetic compatibility studies”, in Proc. of Int. Aerospace and Ground
Conference on Lightning and Static Electricity, Mannheim, Germany, pp. 367-376, May
24-27, 1994.
[4] C. Buccella, A. Orlandi, “Time domain iterative methods for inhomogeneous and non-
linear wave equations in lossy media”, in Proc. of 3rd Int. Conference on Computation
in Electromagnetics, Bath, UK, pp. 265-270, April 10-12, 1996.
[5] C. Buccella, “Numerical computation of ionized fields in electrostatic pulse powered
precipitators”, in Proc. of 6th Int. Conference on Electrostatic Precipitation, Budapest,
Hungary, pp. 178-183, June 18-21, 1996.
5
[6] C. Buccella, A. Orlandi,“A new method for transient analysis of high voltage ionized
field in two-dimensional domain”, in Proc. of 10th Int. Symposium on High Voltage
Engineering ISH’97, Montreal, Canada, pp. 197-200, August 25-29, 1997.
[7] C. Buccella, “Finite difference quasi-static and dynamic models for pulse-powered elec-
trostatic precipitators in presence of dust”, in Conf. Rec. of IEEE Industry Applications
Society Annual Meeting, New Orleans, Lousiana, USA, pp. 1750-1755, October 4-10,
1997.
[8] C. Buccella,“Electrostatic analysis of composite material”, in Conf. Rec. of IEEE Industry
Applicat. Society Annual Meeting, St. Louis, Missouri, USA, pp. 1981-1987, October
12-15, 1998.
[9] C. Buccella,“A circuit approach to model composite material affected by electrostatic di-
scharge”, in Conf. Rec. of IEEE Industry Applications Society Annual Meeting, Phoenix,
Arizona, USA, pp. 393-400, October 2-7, 1999.
[10] C. Buccella,“Computation of the transient voltage distribution caused by direct lightning
on flammable liquid containers” in Conf. Rec. of IEEE Industry Applications Society
Annual Meeting, Phoenix, Arizona, USA, pp. 421-428, October 2-7, 1999.
[11] C. Buccella, “Electric field FDTD analysis of composite structures”, 9th Biennial IEEE
Conference on Electromagnetic Field Computation CEFC’2000, Milwaukee, Wisconsin,
USA, pag. 443, June 4-7, 2000.
[12] C. Buccella, “Three-dimensional simulation of composite cylindrical enclosures exited by
transient current injection”, in Conf. Rec. of IEEE Industry Applications Society Annual
Meeting, Roma, Italy, pp. 600-605, October 8-12, 2000.
[13] C. Buccella, A. Orlandi, “Induced potentials inside vessels containing flammable liquids
during direct lightning strike”, in Conf. Rec. of IEEE Industry Applications Society
Annual Meeting, Roma, Italy, pp. 670-674, October 8-12, 2000.
[14] C. Buccella, “Equivalent electric circuit modeling the skin and proximity effects in mul-
ticonductor structures”, in Proc. of 4th Joint Symp. on Electrostatics, Kyoto, Japan, pp.
88-97, September 25-26, 2000.
[15] C. Buccella, “Network analog solution of quasi-stationary problems involving two-
dimensional anisotropic fields”, in Proc. of 9th Int. Conference on Electrostatics,
Koscielisko-Zakopane, Poland, May 29 - June 2, 2001.
[16] C. Buccella, C. Caruso, M. Feliziani,“Reduction of low frequency magnetic fields by
field-controlled active shields”, in Proc. of IV o Int. Symposium on Electromagnetic
Compatibility and Electromagnetic Ecology, St. Petersburg, Russia, June 19-22, 2001.
[17]
 C. Buccella,“Quasi-stationary modeling of three-dimensional anisotropic fields”, in
Proc. of Twelfth Int. Symposium on High Voltage Engineering (ISH2001), Vol. 1, pp.
46-49, Bangalore, India, August 20-24, 2001.
[18] C. Buccella,“Lightning-induced effects on composite and metal structures”, in Proc. of
Twelfth Int. Symposium on High Voltage Engineering (ISH2001), Vol. 1, Bangalore,
India, pp. 130-133, August 20-24, 2001.
6
[19] C. Buccella, “Calculation of current distribution in a lightning stroked metal structure
considering the non-linear ground impedance”, in Conf. Rec. of IEEE Industry Appli-
cation Society Annual Meeting, pp. 2703-2708, Chicago, Illinois USA, September 30 -
October 4, 2001.
[20] C. Buccella, A. Orlandi, “Lightning protection systems for charged oil metal vessels”,
in Conf. Rec. of IEEE Industry Application Society Annual Meeting, Chicago, Illinois,
USA, pp. 2723-2728, September 30 - October 4, 2001.
[21] C. Buccella, M. Feliziani, A. Prudenzi,“Active shielding design for MV/LV distribution
transformer substation”, in Proc. of 2002 International Symposium & Technical Exibition
on Electromagnetic Compatibility, Beijing, China, 21-24 May 2002.
[22] C. Buccella, M. Feliziani, V. Fuina, “ELF magnetic field mitigation by active shielding”,
2002 International Symposium on Industrial Electronics - Conference Proceedings, Vol.
3, L’Aquila, pp. 994-998, 8-11 July 2002.
[23] C. Buccella,“Optimisation design of active shields for low frequency applications”, 2002
International Symposium on Electromagnetic Compatibility - Conference Proceedings,
Sorrento, Italy, 9-13 Sept. 2002.
[24] C. Buccella,“A simple circuit method to estimate the magnetic attenuation of nonferrous
metal shields”, 20th Biennal IEEE Conference on Electromagnetic Field Computation,
Perugia, Italy, 16-19 June 2002.
[25] C. Buccella, “An accurate numerical method to compute the effects of the protections
against direct lightning on charged liquid tanks” in Conf. Rec. of IEEE Industry Ap-
plication 2002 Annual Meeting, 1 Pittsburgh, Pennsylvania, USA, pp. 1006-1011, 3-18
Oct. 2002.
[26] C. Buccella, M. Feliziani, "Three dimensional magnetic field computation inside a high
speed train with a.c. electrification", in Proc. of 2003 IEEE Int. Symp. on EMC, Vol.1,
Istanbul, Turkey, pp. 617-620, May 11-16, 2003.
[27] C. Buccella, M. Feliziani, G. Manzi, “Identification and localization of defects in shielded
cables by a numerical/experimental procedure”, in Proc. of IEEE Int. Symp. on EMC,
Vol. 1, Boston, USA, pp. 213-218, August 18-22, 2003.
[28] C. Buccella, M. Feliziani, G. Manzi, “UWB communication signals coupling to wires”,
in Proc. of Int. Symp. on Elect. Compat., Sendai, Japan, pp.105-108, June 1-4, 2004.
[29] C. Buccella, M. Feliziani, G. Manzi, “Accurate Detection of Low Entity Cable Faults by
Wavelet Transform”, in Proc. of IEEE Int. Symp. on EMC, Vol. 3, S. Clara, USA, pp.
936-941, Aug. 9-13, 2004.
[30] C. Buccella, M. Feliziani, G. Manzi, “Small Directive Antenna to improve UWB Radio
Communications”, in Proc. of 6th European Symp. on Elect. Compat., Eindhoven, The
Netherlands, pp. 267-272, Sept. 6-10, 2004.
[31] C. Buccella, M. Feliziani, G. Manzi, “Active shielding technique applied to MV/LV
substation”, in Proc. of 6th European Symp. on Elect. Compat. , Eindhoven, The
Netherlands, pp. 289-294, Sept. 6-10, 2004.
7
[32] C. Buccella, M. Feliziani, G. Manzi, “Circuit Modeling of RF Capacitive MEMS Switch”,
IEEE Int. Symp. on Industrial Electronics (ISIE 2005) - Conference Proceedings, Vol.
3, Dubrovnik, Croatia, pp. 1117-1122, June 20-23, 2005.
[33] C. Buccella, M. Feliziani, G. Manzi, “Design of MEMS Switches by Electro-Mechanical
Models”, in Proc. of 15th Conference on the Computation of Electromagnetic Fields,
Vol. 3, Shenyang, Liaoning, China, June 26 - 30, 2005.
[34] C. Buccella, M. Feliziani, G. Manzi, “Characterization of the Shielding Performances of
Composite Materials against UWB Pulses”, in Proc. of 15th Conference on the Com-
putation of Electromagnetic Fields, Vol. 2, Shenyang, Liaoning, China, June 26 - 30,
2005.
[35] C. Buccella, M. Feliziani, F. Maradei, G. Manzi, “Prediction of Voltage and Current
Propagation in Twisted Wire Pairs (TWPs) by a Circuit Model”, in Proc. of IEEE Int.
Symp. on EMC, Vol. 1, Chicago, Illinois, USA, pp. 51-55, August 8-12, 2005.
[36] C. Buccella, M. Feliziani, G. Manzi, “MEMS switch as tunable delay line in wire-
less communications systems”, in Proc. of EMC Europe Workshop, Electromagnetic
Compatibility of Wireless Systems, Rome, Italy, pp. 391-394, September 19-21, 2005.
[37] C. Buccella, M. Feliziani, G. Manzi, “Performance degradation of radio frequency identi-
fication device (RFID) systems produced by tag flexible antenna deformation”, in Proc.
of EMC Europe Workshop 2005 Electromagnetic Compatibility of Wireless Systems,
Rome, Italy, pp. 255-258, September 19-21 2005.
[38] C. Buccella, M. Di Renzo, M. Feliziani, F. Graziosi, G. Manzi, R. Tiberio, “Ultra wide
band propagation measurements in indoor working environment and through building
materials”, in Proc. of EMC Europe Workshop 2005 Electromagnetic Compatibility of
Wireless Systems, Rome, Italy, September 19-21, 2005, pp. 106-109.
[39] C. Buccella, M. Feliziani, G. Manzi, F. Santucci, “Compatibility of Ultra Wide Band
(UWB) radio with power line communication in indoor enviroment”, XXVIII General
Assembly of International Union of Radio Science (URSI) - Conference Proceedings,
New Delhi, India, October 23-29, 2005.
[40] C. Buccella, M. Feliziani,G. Manzi, “Electromagnetic Interferences between PLC and twi-
sted cable”, in Proc. of Int. Symp. of Electromagnetic Compatibility, Barcelona, Spain,
September 4-8, 2006.
[41] C. Buccella, M. Feliziani, G. Manzi, “Generation of Ultra Wide Bandwidth (UWB)
Pulses For Cognitive Radio Applications”, in Proc. of Int. Symp. of Electromagnetic
Compatibility, Barcelona, Spain, September 4-8, 2006.
[42] C. Buccella, V. De Santis, M. Feliziani, “Investigation of Temperature Increase in Human
Eyes Due to Different RF Sources”, Bioelectromagnetic (BEMS) 28th Annual Meeting,
Cancun, Mexico, June 11-15, 2006, II Award as Better Poster.
[43] C. Buccella, V. De Santis, M. Feliziani, “Thermal Elevation in Human Eye due to Walkie-
Talkie Source”, 23th International Conference in Applied Computational Electromagne-
tics (ACES 2007) - Conference Proceedings, Verona, Italy (invited paper), March
19-23, 2007.
8
[44] C. Buccella, V. De Santis, M. Feliziani, “Laboratory case studies towards to PLC Appli-
cation aboard Aircraft”, Electromagnetic Compatibility Europe Workshop - Conference
Proceedings, Paris, France, June 14-15, 2007.
[45] C. Buccella, V. De Santis, M. Feliziani, “Cellular Phone Detection by Leaky Line An-
tennas aboard Aircraft”, Electromagnetic Compatibility Europe Workshop - Conference
Proceedings, Paris, France, (invited paper), June 14-15, 2007.
[46] C. Buccella, V. De Santis, M. Feliziani, “Simulation of an Indoor Power Cable Net-
work for PLC Applications”, in Proc. of IEEE Int. Symp. on Electromag. Compatibility,
Honolulu, Hawaii, USA, pp. 1-5, July 8-13, 2007.
[47] C. Buccella, V. De Santis, M. Feliziani, “Numerical Prediction of SAR and Thermal Ele-
vation in a 0.25-mm 3-D Model of the Human Eye Exposed to Handheld Transmitters”,
in Proc. of IEEE Int. Symp. on Electromag. Compatibility, Honolulu, Hawaii, USA, pp.
50-60, July 8-13, 2007. Best Student Paper/Best Symposium Paper from the
2007 IEEE EMC Society Symposium.
[48] C. Buccella, C. Cecati, M. Di Domenico, “An Accurate Equivalent Circuit of High Po-
wer/High Frequency Planar Transformers using FEM”, 19th International Symposium on
Power Electronics, Electrical Drives, Automation and Motion - Conference Proceedings,
Ischia, Italy, June 11-13, 2008.
[49] C. Buccella, C. Cecati, F. de Monte, “Investigation about the electro-thermal behaviour
of high frequency planar transformers”, 2008 IEEE International Symposium on Indu-
strial Electronics (ISIE-2008) - Conference Proceedings, University of Cambridge, UK,
pp. 374 - 379, 30 June - 2 July 2008.
[50] C. Buccella, C. Cecati, F. de Monte, “Computation of temperature distribution in planar
transformers”, 13th Biennial IEEE Conference on Electromagnetic Field Computation
(CEFC), Athen, May 11-15, 2008.
[51] C. Buccella, V. De Santis and M. Feliziani, “UWB Detection of a Scattering Object
inside a Non-Homogeneous Region” European Electromagnetics (EUROEM), Lausanne,
Switzerland, July 21-25, 2008.
[52] C. Buccella, V. De Santis and M. Feliziani, “Wavelet Filtering Technique applied to UWB
Radar for the Detection of Targets Embedded Inside a Dispersive Multi-Layered Me-
dium”, XXIX General Assembly of the International Union of Radio Science (Union Ra-
dio Scientifique Internationale-URSI) - Conference Proceedings, Chicago, Illinois, USA,
August 7-16, 2008.
[53] C. Buccella, V. De Santis, M. Feliziani, F. Maradei, “Fast Calculation of Dielectric Sub-
strate Losses in Microwave Applications by the FD2TD Method using a New Formali-
sm” in Proc. of IEEE Int. Symp. on Electromagnetic Compatibility, S. Fort Lauderdale,
Florida, USA, pp. 253-256, July 25-30, 2010.
[54] C. Buccella, “Electromagnetic Investigation About Composite Right/Left Handed Tran-
smission Lines”, IEEE International Symposium on Industrial Electronics (ISIE-2010) -
Conference Proceedings, Bari, Italy, July 4-7, 2010.
9
[55] C. Buccella, V. De Santis, M. Feliziani, “Channel characterization of power line commu-
nications over in-vehicle wire harness ”, in Proc. of IEEE EMC Europe, York, UK, pp.
204 - 207, September 26-30, 2011.
[56] C. Buccella, C. Cecati, F. de Monte, “A Computational Method of Temperature Di-
stribution in High Frequency Planar Transformers”, IEEE International Symposium on
Industrial Electronics (ISIE-2011) - Conference Proceedings, Gdansk, Poland, pp. 477 -
482, June 27-30, 2011.
[57] C. Buccella, C. Cecati, P. Siano, “A Fuzzy-Logic-Controlled Resonant Converter for
Renewable Energy Sources Applications”, IEEE International Conference on Industrial
Electronics (IECON 2011) - Conference Proceedings, Melbourne, Australia, pp. 2450 -
2455, November 7-10, 2011.
[58] C. Buccella, C. Cecati, H. Latafat and K. Razi, “Digital Control of a Half-Bridge LLC
Resonant Converter”, 15th Int. Power Electronics and Motion Control Conf. and Expo-
sition - Conference Proceedings, (EPE-PEMC 2012 ECCE Europe), Novi Sad, Serbia,
Sept. 4-6, 2012.
[59] C. Buccella, C. Cecati, M. G. Cimoroni, “Investigation About Numerical Methods for Se-
lective Harmonics Elimination in Cascaded Multilevel Inverters”, Int. Conf. on Electrical
Systems for Aircraft, Railway and Ship Propulsion - Conference Proceedings, Bologna,
Italy, pp. 1-6, October 16-18, 2012.
[60] C. Buccella, C. Cecati, H. Latafat and K. Razi, “Comparative transient response ana-
lysis of LLC resonant converter controlled by adaptive PID and fuzzy logic control-
lers,” IEEE International Conference on Industrial Electronics (IECON 2012) Procee-
dings, Montréal, Canada, pp. 4729-4734, October 25 - 28, 2012, (Best Session Paper
Award).
[61] C. Buccella, C. Cecati, M. G. Cimoroni, “Harmonics Elimination in 5-Level Converters
Operating at Very Low Switching Frequency”, International Conference on Industrial
Technologies (ICIT 2013) - Conference Proceedings, Cape Town, pp. 1946 - 1951, 25-28
February 2013.
[62] C. Cecati, C. Buccella, P. Siano, A. Piccolo, “Optimal Operation of Smart Grids with
Demand Side Management,” International Conference on Industrial Technologies (ICIT
2013) - Conference Proceedings, Cape Town, 25-28 February 2013.
[63] C. Buccella, C. Cecati, M. G. Cimoroni, P. Siano, “An Analitycal Algorithm for Selective
Harmonics Elimination and Efficient Control in 5-Level Inverters,” IEEE Int. Symp. on
Industrial Electronics (ISIE 2013) - Conference Proceedings, Taiwan, 28-31 May, 2013.
[64] A. Ul-Haq, C. Buccella, C. Cecati, H. A. Khalid, “Smart Charging Infrastructure for EVs
with Comparison of State-of-the-Art Technologies,” International Conference on Clean
Electrical Power - Conference Proceedings, Alghero, 11-13 June, 2013.
[65] C. Buccella, C. Cecati, H. Latafat, K. Razi, “A Grid-Connected PV System with LLC
Resonant DC-DC Converter”, International Conference on Clean Electrical Power -
Conference Proceedings, Alghero, 11-13 June 2013.
10
[66] C. Buccella, C. Cecati, M. G. Cimoroni, K. Razi, “Real-time Harmonics Elimination pro-
cedures for high-power converters,” IEEE International Workshop on Intelligent Energy
Systems (IWIES), pp. 179 - 184, Nov. 14, Vienna, Austria, 2013, (Best Session Paper
Award).
[67] C. Buccella, C. Cecati, H. Latafat, P. Pepe, K. Razi, “Linearization of LLC resonant
converter model based on extended describing function concept,” IEEE International
Workshop on Intelligent Energy Systems (IWIES), pp. 131 - 136, Nov. 14, Vienna,
Austria, 2013.
[68] C. Buccella, C. Cecati, M. G. Cimoroni, P. Giammatteo, H. A. Khalid, H. Latafat,
K. Razi, A. Ul-Haq, SMART SQUARE: Smart Bi-directional Interface for EVs with
Market-based Energy Flow Management and Smart Grid Stabilization Capabilities, The
terawatt challenge: what research for our future energy? ACCADEMIA NAZIONALE
DEI LINCEI - FONDAZIONE ENI ENRICO MATTEI XXXI GIORNATA DELL’AM-
BIENTE Convegno internazionale, 5 - 6 novembre 2013 - Palazzina dell’Auditorio - Via
della Lungara, 230, Roma.
[69] C. Buccella, C. Cecati, M. J. Chaudhriy, M. G. Cimoroni, P. Giammatteo, H. A. Khalid,
H. Latafat, K. Razi, A. Ul-Haq, Smart Square, Invited Project. In: Innovact Forum,
Reims, France, March 26-27, 2013.
[70] C. Buccella, C. Cecati, H.A. Khalid, A. C. Ul-Haq, “On flatness-based control for series-
connected VSC for voltage dip mitigation,” 2014 IEEE 23rd International Symposium
on Industrial Electronics (ISIE), pp. 2637 - 2642, Istanbul, Turkey, 1-4 June 2014.
[71] C. Buccella, C. Cecati, M. G. Cimoroni, K. Razi, “Harmonic mitigation technique for
multilevel inverters in power systems,” International Symposium on Power Electronics,
Electrical Drives, Automation and Motion (SPEEDAM), pp. 73 - 77, June 18-20, Ischia,
Italy 2014.
[72] C. Buccella, C. Cecati, M. G. Cimoroni, K. Razi, “A deterministic harmonics mitigation
technique for five-level inverters,” 40th Annual Conference of the IEEE International
Conference on Industrial Electronics (IECON 2014) Proceedings, pp. 1007 - 1013, Dallas,
TX - USA October 29 - November 1, 2014.
[73] V. Boscaino, R. Miceli, C. Buccella, C. Cecati, H. Latafat, K. Razi, “Fuel Cell po-
wer system with LLC resonant DC/DC converter,” IEEE International Electric Vehicle
Conference, Florence, Italy, Dec. 17-19, 2014.
[74] C. Buccella, C. Cecati, M. G. Cimoroni, “SHE formulation for five level inverters with
unequal DC sources,” IEEE International Conference on Industrial Technology (ICIT),
Sevilla, Spain, pp. 1167 - 1172, 17-19 March 2015.
[75] C. Buccella, C. Cecati, E. de Santis, H. A. Khalid, “Impact of the Number of Angles
and Levels on Harmonic Mitigation in Multilevel Converters,” 41th Annual Conference of
the IEEE International Conference on Industrial Electronics (IECON 2015) Proceedings,
Yokohama, Japan, 9-12 Nov. 2015.
[76] C. Buccella, C. Cecati, H. A. Khalid, D. Xu “On Flatness-based Controller for Shunt-
Connected VSC with LCL-filter for Voltage Dip Mitigation in a Weak,” 41th Annual
11
Conference of the IEEE International Conference on Industrial Electronics (IECON
2015) Proceedings, Yokohama, Japan, 9-12 Nov. 2015.
[77] C. Buccella, C. Cecati, M. G. Cimoroni, “Performance analysis and simulation of un-
balanced DC sources five level inverter topology,” 4th International Conference on Re-
newable Energy Research and Applications, ICRERA 2015, Palermo, Italy, 22-25 Nov.
2015.
[78] E. Babaei, M. Sarbanzadeh, M. Ali Hosseinzadeh, C. Buccella, “A New Topology for
Cascaded Multilevel Inverters with Reduced Number of Power Electronic Switches,” 7th
Power Electronics, Drive Systems & Technologies Conference, PEDSTC 2016, Tehran,
Iran, 16-18 Feb. 2016.